The process of dealing with water damage starts with water mitigation. Mitigation, which includes water removal, moisture control, and structural drying, stops further damage from happening.
Consider water mitigation as an emergency action that limits its immediate effects. It reduces secondary water damage like buckled floors, falling apart drywall, and overall mold development. By preventing secondary damage from being caused by water damage, it is possible to minimize the amount of property loss caused by a water leak or flood. This procedure typically entails removing the water, drying, sanitizing, and cleaning. After discovering a water leak or any water damage, the initial action should be water mitigation.
The first step in full-service repairs and property-wide restoration is water mitigation. Additionally, there are a variety of causes of water damage, not all of which can be foreseen or planned for. Because of this, we offer prompt, high-quality water damage repair service in Olathe, KS, and are available around the clock. To begin cleaning up the water damage, stop it from getting worse, and return your property to its pre-water damage condition, our expert water damage cleanup Olathe-based technicians can deploy quickly.
Process of Water Mitigation
1. Assessing the situation
- The first steps are taking stock of the situation, estimating the damage, and locating the water source. At this point, it is crucial to consider safety as well. It might not be safe to start the process without professional assistance if your home’s structure has been compromised or water damage has affected electrical components.
- However, once you are confident that it is secure, you should carefully evaluate the harm that has been done. Assessing the situation will enable you to create a comprehensive plan (typically in collaboration with your insurance provider and contractors) for the damage repair. The process of repairing water damage typically starts here.
2. Locating the source of water
Locating the source of the water is a must. This would be a long process since you have to look everywhere. Remember that locating the source of the water can be very risky and it is very hazardous; make sure to wear proper gear such as boots, gloves, and an overall suit. Some damaged wires may cause electric shocks if not turned off. Be sure to turn off the water valve and electricity in your place. These are the following possible source of water problems:
- Problems with the drain pipe- A clogged main drain line can ruin an entire day. Damage in your drain pipes may be caused by corrosions or clogs, or it may be possible that your drain pipes have been damaged.
- Rainstorms or melting snow- Higher flow from lengthy downpours and, in exceptional cases, rain and snow, creates a gradual increase in the water level across a larger area. This makes water overflow increasingly frequent in moist areas for larger bodies of water. Although snow blockages on a stream or large waves can block the flow, most floods are triggered by downpours of some type.
- Valves that are leaking – A single water leak might foreshadow significant flooding concerns in the long term – a busted pipe can pump water pouring throughout your property in moments. Call a plumbing professional if you’ve detected leaky pipes due to defective pipelines earlier before they cause flooding.
- Holes in the structure- Structural restoration is required to avoid floods caused by defective structures. Checked after every rainfall or after the snow melts. If the structure of your property has defects or cracks, water may seep through the floorboards.
If natural storms or weather-related factors cause the flood, you should thoroughly inspect the structure of your property because it could happen again if another storm or snow falls. Contact reputable plumbers to ensure that this situation does not reoccur.
3. Water removal
If your property floods during a disaster, you’ll have to undertake a portion of the cleanup manually. Professionals will be challenging to find as demands for their expertise rise and expenses rise. You’ll need to perform some tasks by yourself if you need them completed in any way. Obtaining the equipment required for these activities is one of the most challenging things. After identifying the cause of the water damage, you may proceed with removing the water in your area.
- Start draining surface water from your property if you have a sump pump. But you can also start such if you possess industrial vacuums.
- If you possess water vacuums, you can use them, specifically if the water is not that high. Removing water is risky since you might have to turn on the electricity on your property. Water removal may be risky, but it would be best to contact a plumbing service.
4. Sanitizing it to get rid of any potentially dangerous components
- Drying a place to stop mold growth or additional structural damage.
- This process will also correct any harm that could affect your lifestyle or your home.
- Clean up everything. Bacteria can accumulate in your walls, floors, and carpets due to water damage. It’s crucial to clean up these areas to stop any water damage. You can purchase a disinfectant cleaner at a nearby supermarket or hardware store. Ask a staff member for an anti-bacterial, especially to handle water damage. Cleanse your floors and walls with an anti-bacterial cleaner.
- Review the disinfectant’s instructions before purchasing. It will be necessary to dilute various antibacterial substances with varying amounts of water.
- Additionally, you can use water and bleach in your home. Depending on the bleach you’re using, a ratio of half a cup per gallon of water is typically safe.
- Speak with experts in this field to clean up your belongings.
5. Getting the property back to how it was before the water damage
Restoring your property to its pre-water damage condition is the last step. All salvageable items must be returned, and the surfaces must be sanitized to remove any remaining mold.
Better Safe Than Sorry
The first step you should do if you experience water damage is to call a water damage restoration professional. Without thorough and appropriate drying and sanitation, you could be at risk for mold growth. The water may contain hidden dangers.
Our water damage restoration specialists can help you save as many of your possessions as is practical. They have years of experience helping property owners get their lives back to normal. Additionally, we can guide you through our thorough documentation and understanding of the insurance claims procedure.